How to Install Agfa Accuset 1000 Imagesetter Drivers
The Agfa Accuset 1000 is an imagesetter that can output film or paper at resolutions up to 2400 dpi. It is compatible with PostScript Level 2 and supports various media sizes and types. To use the Agfa Accuset 1000, you need to install the appropriate drivers on your computer.
Agfa Accuset 1000 Imagesetter drivers
There are different drivers for different operating systems and interfaces. The Agfa Accuset 1000 can be connected via SCSI or PIF (Parallel Interface). Depending on your configuration, you may need to install additional software or hardware to communicate with the imagesetter.
Here are some steps to install the Agfa Accuset 1000 drivers:
Download the drivers from the Agfa website or from a reliable source. You can find some links to the drivers in the references below[^1^] [^2^]. Make sure you download the correct drivers for your operating system and interface.
Extract the downloaded files to a folder on your computer. You may need a program like WinZip or WinRAR to unzip the files.
Run the setup program or follow the instructions in the readme file to install the drivers. You may need to restart your computer after the installation.
Connect the Agfa Accuset 1000 to your computer via SCSI or PIF. Make sure the imagesetter is turned on and ready.
Open your printing software and select the Agfa Accuset 1000 as your output device. You may need to configure some settings such as media size, resolution, screening, etc.
Send your file to print and enjoy your high-quality output.
If you encounter any problems with the installation or operation of the Agfa Accuset 1000, you can refer to the user manual or contact Agfa support for assistance.Here are some additional information about the Agfa Accuset 1000 imagesetter:
The Agfa Accuset 1000 uses a laser diode to expose the film or paper. The laser diode has a lifetime of about 10,000 hours and can be replaced by a service technician.
The Agfa Accuset 1000 can output up to 16 pages per minute at 1200 dpi or 8 pages per minute at 2400 dpi. The maximum output width is 14 inches and the maximum output length is 200 feet.
The Agfa Accuset 1000 supports various media types such as Agfa Lithostar film, Agfa Rapiline paper, Agfa Setprint paper, and Agfa Setcopy paper. The media is loaded in cassettes that can hold up to 100 feet of film or paper.
The Agfa Accuset 1000 has a built-in densitometer that can measure the density of the output and adjust the exposure accordingly. The densitometer can also be used to calibrate the imagesetter and create linearization curves.
The Agfa Accuset 1000 has a user-friendly control panel that displays the status and error messages of the imagesetter. The control panel also allows the user to perform some functions such as loading and unloading media, setting the resolution and screening, testing the laser diode, etc.
The Agfa Accuset 1000 is a reliable and versatile imagesetter that can produce high-quality output for various applications. It is easy to install and operate and requires minimal maintenance. It is compatible with most printing software and supports PostScript Level 2 commands. The Agfa Accuset 1000 is a great choice for anyone who needs a fast and accurate imagesetter. e0e6b7cb5c